Safety glass · EN 12150 · CCC

Fully tempered glass,
up to 3,660 × 12,000 mm

China Glass Factory tempers flat glass in Qinzhou, China, from 4 mm to 19 mm, with panels up to 3,660 × 12,000 mm and 43.9 m². Every batch is checked for fragmentation, bow and roller wave before packing, heat-soak testing to EN 14179 is available for façade work, and production runs 7–15 days after order confirmation.

Thickness4–19 mm
Max panel3,660 × 12,000 mm
Fragmentation≥ 40 particles
Bow≤ 0.2 %
Tempered safety glass panels for doors, shopfronts and balustrades — processed in-house In-house tempering

Specification

What tempered glass sizes and thicknesses can you produce?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

Thickness4, 5, 6, 8, 10, 12, 15 and 19 mm
Maximum panel size3,660 × 12,000 mm — 43.9 m² per panel
Minimum size200 × 300 mm
StandardsEN 12150-1, GB 15763.2, ASTM C1048
Fragmentation40 particles or more in a 50 × 50 mm area
Bow / warp0.2 % of edge length maximum
Roller wave0.15 mm per 300 mm maximum
Edge workArrissed, flat polished, mitred, drilled and cut-out on CNC
Heat-soak testOptional, to EN 14179
Dimensional tolerance± 1 mm on cut size, ± 0.2 mm on thickness

Applications

Where is tempered glass used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01Façade and curtain wall

Vision glass, spider-glazed panels and full-height sheets where wind load and thermal stress are both high.

02Partitions and balustrades

Single or laminated build-ups for office partitions, glass doors and frameless balustrades.

03Shopfronts and displays

Large uninterrupted panels with polished edges, holes and notches already cut.

04Equipment and interiors

Machine guards, oven doors, stove tops and furniture where thermal shock resistance is needed.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is tempered glass packed for sea freight?

Tempered panels go into seaworthy wooden crates or steel A-frames with the glass standing on its edge. Each crate carries a panel list matching the packing list, so your site team can identify every sheet without opening all of them.

  • Cork pads and foam end caps on every edge
  • Corner protectors on all four corners
  • Aluminium foil moisture barrier with desiccant bags
  • Panels numbered to match the shop drawing
  • Loading photos sent before the container is sealed

Approvals

What standards and test reports come with it?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

CE — EN 12150 China CCC ISO 9001:2015 SIRIM Malaysia BPS Philippines

Questions

What do buyers ask before ordering tempered glass?

Why should tempered glass be heat-soak tested?
Tempering can leave microscopic nickel sulphide inclusions that expand over time and cause spontaneous breakage. A heat-soak test cycles the glass through 290 °C to force those panels to fail in the oven instead of on your building. It is strongly recommended for façade glass and mandatory on many projects in the Gulf and Europe.
Can you match glass already installed on a building?
Yes, if you send the original specification or a sample. We match tint, coating and thickness, and for coated glass we confirm the coating stack with the supplier before production. Expect the match to be close but not identical on aged façades.
What is the production lead time?
20 to 30 working days after drawing approval for standard tempered glass. Heat-soaked and jumbo panels take longer, typically 30 to 40 working days, because the heat-soak oven cycle adds four to five days on its own.
Do you polish edges and drill holes in-house?
Yes. All edge work, drilling, cut-outs and notches are done before tempering, on our own CNC lines. Anything drilled after tempering will break the panel, so send the complete shop drawing with the order.

Tempered glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Thickness, panel size, edge work and heat-soak all move the rate, so we quote against the build-up on your drawing rather than a list price.

What do we need to price your drawing?

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

How is tempered glass shipped to the Philippines?

Tempered glass is supplied to Philippine projects from our own plant in Qinzhou, China. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7-15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Manila and Cebu have their own pages.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.