Impact tested assemblies

Hurricane and impact
resistant glazing

China Glass Factory supplies hurricane and impact resistant laminated glass from Qinzhou, China, tested to ASTM E1886 and E1996 for wind-borne debris and 4,500 pressure cycles. Build-ups run 0.76–2.28 mm PVB or SGP, monolithic or in an IGU, up to 2,400 × 4,200 mm as a tested assembly for wind zones 1–4.

StandardASTM E1886 / E1996
Zones1–4
Build-upLaminated + IGU
TestedMissile + cycling
Hurricane-resistant laminated glass for typhoon regions including the Philippines Coastal grade

Specification

What hurricane glass can you produce?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

StandardsASTM E1886, ASTM E1996, and Miami-Dade / Florida product approval on request
Wind zoneZones 1 to 4, including large-missile zones
TestLarge missile impact followed by 4,500 cyclic pressure cycles
Build-upLaminated with PVB or SGP, monolithic or in an IGU
Interlayer0.76 mm to 2.28 mm depending on zone and panel size
Maximum size2,400 × 4,200 mm as a tested assembly
FramingTested with the frame system; fixing detail supplied
DocumentationTest report with the assembly and the design pressure

Applications

Where is hurricane glass used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01Coastal high-rise

Façade glazing in cyclone and typhoon belts where debris impact is a design case.

02Residential windows

Impact-rated units that also meet the energy code.

03Schools and hospitals

Shelter glazing and protected openings on essential facilities.

04Anti-smash retail

Laminated build-ups that resist repeated forced entry attempts.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is it packed for a long sea route?

Coastal projects are often far from the plant, so packing is specified for a long sea route: heavier crates, more desiccant and a moisture barrier that survives a container sweating through four climate zones.

  • Sealed moisture barrier and desiccant
  • Edge protection on every panel
  • Crate labelled with the zone and assembly reference
  • Assembly test report attached to the shipping documents
  • Loading photos before the container closes

Approvals

What standards is it tested to?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

ASTM E1886 / E1996 test report CE — EN 14449 ISO 9001:2015

Questions

What buyers ask first

Does the frame have to be tested too?
Yes. Impact ratings apply to the whole assembly — glass, frame, anchors and seals. A rated panel in an untested frame will fail. We supply the tested frame specification with the glass, or work with your system supplier.
What is the large missile test?
A 9 lb (4 kg) timber missile fired at 50 ft per second, followed by 4,500 cycles of positive and negative pressure. The glass must not tear or leave the frame. It is the standard used in Florida and most Caribbean projects.
Is this the same as bullet-resistant glass?
No. Hurricane glass is designed for wind-borne debris and pressure cycling — a slow, repeated load. Security glass is designed for a concentrated ballistic impact. A few build-ups meet both, but they are different specifications.
Do you have Miami-Dade approval?
We can supply ASTM E1996 test reports. Miami-Dade notice of acceptance depends on the exact assembly and is arranged per project — tell us early if the project requires it, because it adds lead time.

Send the drawing,
we will send a price.

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

Hurricane resistant glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. The tested assembly, interlayer thickness and wind zone set the number, so we quote the tested configuration, not the nearest standard panel.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

Supplied to the Philippines

Hurricane-resistant laminated glass is supplied to Philippine projects from our own plant in Qinzhou, China. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7-15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Manila and Cebu have their own pages.