Frit · full tone or gradient

Silk-screen frit and
patterned glass

China Glass Factory prints ceramic frit glass in Qinzhou, China, at 10 to 100 % coverage and up to 3,300 × 9,000 mm in 4 to 19 mm. Solid frit for spandrels, halftone gradients and dot patterns for solar control, plus privacy grades for interiors — fired during tempering, so the pattern becomes part of the surface.

Coverage10–100 %
Max size3,300 × 9,000 mm
FritCeramic, temperable
ColoursBlack, white, grey
Silk-screen printed decorative architectural glass Spandrel and privacy

Specification

What silk-screen glass can you produce?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

ProcessScreen printing with ceramic frit, fired during tempering
Coverage10 % to 100 %, solid or gradient
PatternsDot, line, mesh, custom logo and custom repeat
Maximum size3,300 × 9,000 mm
Thickness4 to 19 mm
ColoursBlack, white, grey, plus matched colours on request
Build-upsMonolithic, laminated, insulating
Standard complianceEN 12150 for the tempered pane, EN 1096-1 for coated
MOQFrom one crate

Applications

Where is silk-screen frit glass used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01Spandrel panels

Opaque frit hides the floor slab behind the curtain wall.

02Solar control

Dot patterns reduce solar gain while keeping a view out.

03Interior privacy

Gradient frit on meeting rooms and consulting rooms.

04Appliances and furniture

Printed glass for oven doors, splashbacks and table tops.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is the frit face protected in transit?

Same protection as printed glass — the frit face is wrapped and interleaved, and the crate carries the orientation mark.

  • Frit face wrapped in low-tack film
  • Foam interleaving between panels
  • Orientation arrow on the crate
  • Pattern reference number on the label
  • Sample retained for repeat orders

Approvals

What standards and test reports come with it?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

CE — EN 12150 China CCC ISO 9001:2015

Questions

What buyers ask first

Can the frit be a gradient?
Yes. A gradient is printed with a halftone dot screen that changes density across the panel, so the transition is smooth from opaque to clear. Send the start and end points on the drawing and we will produce a sample for approval.
Does the frit affect tempering?
It is fired during tempering, so the two processes are designed together. A heavy frit coverage can change how the glass heats, so we adjust the furnace cycle. The pane is still fully tempered and tested for fragmentation.
Silk screen or digital print?
Silk screen for solid colours and repeating patterns — it is cheaper per square metre and the colour is very consistent. Digital for photographs, fine gradients and short runs where making a screen is not worth it.
Can frit be applied to Low-E glass?
Yes, but the frit must be on a surface that does not damage the coating, and the coating needs edge deletion. Tell us the surface layout and we will confirm the sequence before production.

Send the drawing,
we will send a price.

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

Silk-screen glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Coverage, number of colours, pattern repeat and the screen set-up for a first run are costed separately, so we quote against your artwork.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

How is silk-screen glass shipped to the Philippines?

Silk-screen printed glass is supplied to Philippine projects from our own plant in Qinzhou, China. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7-15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Manila and Cebu have their own pages.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.