Safety and acoustic · EN 14449

Laminated glass with PVB
or SGP interlayer

China Glass Factory laminates two to six panes in Qinzhou, China, with 0.38 mm to 3.04 mm PVB, SGP or EVA interlayer, in sizes up to 3,660 × 12,000 mm. The glass breaks, the interlayer holds — which is what keeps overhead glazing and balustrades safe after impact. Production runs 7–15 days after order confirmation.

InterlayerPVB / SGP
Thickness0.38–3.04 mm
Max panel3,660 × 12,000 mm
Impact classEN 12600
Laminated glass with PVB or SGP interlayer for typhoon and windborne-debris zones PVB and SGP

Specification

What interlayer and size options can you produce?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

InterlayerPVB, SGP (SentryGlas), EVA on request
Interlayer thickness0.38, 0.76, 1.14, 1.52, 2.28, 3.04 mm and multiples
Number of plies2 to 6 glass panes
Maximum size3,660 × 12,000 mm
Glass typesFloat, low-iron, coated, tempered, heat-strengthened, curved
Impact classificationEN 12600 class 1B1, 1B2, 2B2, 3B3
AcousticRw up to 42 dB with an asymmetric build-up
EdgeCut, polished, or sealed against moisture ingress
StandardsEN 14449, GB 15763.3, ASTM C1172
Security gradesEN 356 P1–P8 and bullet-resistant classes on request

Applications

Where is laminated glass used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01Overhead glazing

Skylights, canopies and atria — the interlayer is what stops glass falling on people below.

02Balustrades

Laminated tempered panels to EN 12600, with the interlayer holding the sheet after breakage.

03Acoustic separation

Asymmetric build-ups for hotels, airports and offices facing traffic noise.

04Security glazing

Multi-layer PVB for banks, jewellers and embassy counters.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is the edge protected in transit?

Laminated glass is sensitive to moisture at the exposed edge. Crates are lined, the edges are sealed, and every crate is marked so the panels are not stood in water on site.

  • Edge seal intact on all four sides
  • Cork or EVA pads between panels
  • Moisture barrier with desiccant
  • Crates marked THIS WAY UP and KEEP DRY
  • Packing photos before loading

Approvals

What standards and test reports come with it?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

CE — EN 14449 GB 15763.3 — tested ISO 9001:2015 EN 12600 impact reports

Questions

What do buyers ask first?

PVB or SGP — which one do I need?
PVB is the standard choice for overhead glazing, acoustic control and general safety, and it is cheaper. SGP is about a hundred times stiffer and five times stronger in post-breakage performance, so it is used for structural balustrades, blast resistance and any application where the glass must stay in place after breaking.
Why does laminated glass sometimes go cloudy at the edge?
Moisture has reached the interlayer. It happens when the edge seal is damaged in transit or when panels are stored in water on site. Our crates are sealed and lined, but the panels still need to be stored dry and off the ground.
Can you laminate curved glass?
Yes, but the panes must be curved before lamination and the interlayer must be the grade suited to bending. Curved laminated glass is made to order and needs a mould, so allow 35 to 45 working days.
How much noise does laminated glass actually block?
A 6 + 0.76 + 6 build-up gives about 35 dB (Rw). Going asymmetric — 8 + 1.14 + 5 — and adding a dissimilar cavity gets you to 40 or 42 dB. Laminated glass is far more effective against traffic and aircraft noise than thicker monolithic glass.

Laminated glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Interlayer type, ply count, panel size and edge sealing each move the rate, so a laminated build-up is quoted against your drawing rather than a list price.

What do we need to price your drawing?

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

How is laminated glass shipped to the Philippines?

Laminated glass is supplied to Philippine projects from our own plant in Qinzhou, China. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7-15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Manila and Cebu have their own pages.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.