EI / EW / E · 30 to 120 minutes

Fire-rated glass,
EI, EW and E class

China Glass Factory supplies heat-insulating EI, radiation-reducing EW and non-insulating E glass from Qinzhou, China, tested at 12, 14 and 19 mm and up to 2,400 × 4,200 mm. The door or window system is certified as an assembly, not just the pane. Production runs 7–15 days after order confirmation.

EI rating30–120 min
EW rating30–60 min
Tested thickness12 / 14 / 19 mm
SystemsGlass + frame
Fire-rated glass available in EI, EW and E classifications Own test furnace

Specification

What fire classes, ratings and sizes can you produce?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

ClassesEI (Class A, heat-insulating), EW (Class B, radiation-reducing), E (Class C, non-insulating)
RatingEI 30 / 60 / 90 / 120, EW 30 / 60, E 30 / 60
Tested thickness12 mm, 14 mm and 19 mm
ConstructionsNano-silica gel, water-gel and multi-layer intumescent build-ups
Maximum sizeUp to 2,400 × 4,200 mm depending on class and construction
Impact safetyTempered or laminated outer pane, EN 12600 tested
Test standardsEN 13501-2, EN 1363-1, GB 15763.1, ASTM E119
System certificationGlass certified together with the steel or aluminium frame
DocumentationTest report and classification report issued with the order

Applications

Where is fire-rated glass used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01Staircases and lobbies

EI 60 glass in fire-rated partitions between floors, keeping daylight in the stair core.

02Fire compartment walls

EW glass where radiation heat must be limited but full insulation is not required.

03Fire doors and windows

Certified assemblies with the frame, hinges, closer and intumescent seals supplied together.

04Façade fire bands

Spandrel and curtain wall fire stops that keep the compartment line continuous.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is fire-rated glass protected in transit?

Fire-rated panes carry a gel or intumescent layer that must not be exposed to moisture or impact at the edge. They are crated separately from ordinary glass, with the class and the assembly reference printed on every crate.

  • Edge seal protected by foam profile
  • Panels crated by class and by floor, never mixed
  • Crate labelled with EI / EW / E rating and minutes
  • Test report copy in the document pouch
  • No flat stacking — always on edge

Approvals

What test and classification reports come with it?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

EN 13501-2 classification EN 1363-1 test report GB 15763.1 — tested ISO 9001:2015

Questions

What do buyers ask first?

What is the difference between EI, EW and E?
E blocks flames and smoke only. EW also limits radiant heat to below 15 kW/m² on the unexposed side. EI insulates — the average temperature rise stays under 140 °C, so paper and furniture behind the glass will not ignite. Most public buildings in Europe and the Gulf now ask for EI in escape routes.
Can I use fire-rated glass in a standard aluminium frame?
Only if the frame is part of the tested system. The glass rating means nothing without the frame, the fixing method and the intumescent seals that were tested with it. We supply glass and frame together, or certify against a frame you already have if the test allows it.
Do you provide the test report?
Yes, the classification report and the full test report are issued with the order, in English, with the tested build-up, maximum size and the frame specification listed. Architects and fire consultants usually need them before approving.
Is there a cheaper single-pane option?
For E 30 you can use a single tempered pane with a special edge treatment, which is the lowest-cost route. Anything above E 30, and every EI application, needs a multi-layer or gel-filled construction and costs significantly more.

Fire-rated glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Class, rating in minutes, construction and frame system are quoted together, because the certificate is issued for the assembly and not for the pane alone.

What do we need to price your drawing?

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

How is fire-rated glass shipped to the Philippines?

Fire-rated glass is supplied to Philippine projects from our own plant in Qinzhou, China. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7-15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Manila and Cebu have their own pages.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.