Panels to 43.9 m²

Jumbo glass panels,
up to 3,660 × 12,000 mm

The largest architectural panels we produce in Qinzhou, China, are 3,660 × 12,000 mm — 43.9 m² per sheet — from 6 to 19 mm glass, tempered, laminated, coated or printed. Lobby walls without a single vertical joint, uninterrupted shopfronts, and atria that read as one sheet of glass. Production runs 7–15 days after order confirmation.

Max size3,660 × 12,000 mm
Panel area43.9 m²
Max weight≈ 2.1 t / panel
Thickness6–19 mm
Jumbo glass panel up to 3,660 × 12,000 mm, 43.9 m² per panel Largest in the group

Specification

What sizes, thicknesses and processing can you produce?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

Maximum size3,660 × 12,000 mm
Maximum area43.9 m² per panel
Thickness6, 8, 10, 12, 15 and 19 mm
Weight2.5 kg per m² per mm — a 19 mm jumbo panel weighs about 2.1 tonnes
ProcessingTempered, heat-strengthened, laminated, coated, printed
PackingSteel A-frame or heavy timber crate, single panel per frame
Loading20 ft flat rack, 40 ft open top, or break bulk
LiftingVacuum lifters or spreader beam with four-point slinging
Tolerance± 2 mm on length above 8,000 mm

Applications

Where are jumbo panels used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01Hotel and office lobbies

A single 12 m glass wall with no vertical joint, which reads as an architectural feature rather than a window.

02Flagship retail

Uninterrupted shopfronts where any mullion would break the display.

03Museum and gallery

Large low-iron panels for display walls and protective screens.

04Atrium and skylight

Structural glazing where fewer joints means fewer leak paths.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is one oversized panel packed and lifted?

Jumbo glass cannot be handled like standard crates. Each panel gets its own steel A-frame, is lifted with vacuum equipment, and is loaded so it stands on its long edge for the whole voyage.

  • Steel A-frame with rubber-faced supports
  • Lifting points and centre of gravity marked on the frame
  • Edge protection on all four sides
  • Frame bolted to the container floor or flat rack
  • Loading sequence photographed and videoed

Approvals

What standards and test reports come with it?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

CE — EN 12150 China CCC ISO 9001:2015 Heat-soak to EN 14179

Questions

What do buyers ask first?

How is a 12 m panel actually shipped?
On a flat rack or in an open-top container, standing on its long edge in a steel A-frame that is bolted down. For very large orders we ship break bulk. The routing is planned before production because not every port or inland road can take a 12 m frame.
What happens if a jumbo panel breaks in transit?
We photograph every panel at loading and again on arrival at your site, so the condition is documented at both ends. Insurance covers the shipment, and we keep production records for 12 months so a replacement can be matched. Replacement lead time is 20 to 30 working days.
Can jumbo panels be laminated as well?
Yes, and it is common for overhead glazing. Laminated jumbo glass is heavier and needs a stronger A-frame, and the maximum size may drop slightly depending on the interlayer. Ask for a build-up check before you fix the design.
Is there a minimum order for jumbo sizes?
No formal minimum, but a single panel carries the same set-up cost as a batch, so it makes sense to group jumbo panels into one production run. Tell us the full list and we will schedule them together.

Jumbo glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Panel area, thickness, processing and packing each carry their own premium, so an oversized panel is quoted against your drawing rather than a list price.

What do we need to price your drawing?

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

How are jumbo panels shipped to the Philippines?

Jumbo glass panels is supplied to Philippine projects from our own plant in Qinzhou, China. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7-15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Manila and Cebu have their own pages.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.