Bent tempered · 3,300 × 9,000

Curved tempered glass,
bent in our own furnace

China Glass Factory bends and tempers curved glass in Qinzhou, China, with arc lengths to 3,300 mm, heights to 9,000 mm and thickness from 5 to 19 mm. Radius, chord and height are set from your shop drawing, we confirm the mould before production, and the run takes 30 to 45 working days including the mould.

Arc length3,300 mm
Height9,000 mm
Thickness5–19 mm
TemperedYes
Curved tempered glass produced on the bending furnace Custom moulds

Specification

What curved glass can you produce?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

Maximum arc length3,300 mm
Maximum height9,000 mm
Thickness5, 6, 8, 10, 12, 15 and 19 mm
Minimum radiusFrom 700 mm depending on thickness
Build-upsMonolithic, laminated, insulating
Tolerance on radius± 5 mm on the chord, checked against a template
OpticalAnisotropy and slight optical distortion are inherent to bent tempered glass
PackingCustom timber cradle shaped to the radius
Lead time30 to 45 working days including mould

Applications

Where is bent glass used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01Curved façades

Corner glazing and cylindrical towers where flat panels would create a visible break.

02Revolving doors

Bent drum panels with polished vertical edges.

03Balustrades and stairs

Curved laminated panels following the stair or balcony line.

04Interior and furniture

Shower screens, counters and display cases with a controlled radius.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is curved glass packed and shipped?

Curved panels cannot go into a flat crate. Each order gets a timber cradle cut to the radius so the glass rests on its full edge, and the cradle is marked with the panel sequence for installation.

  • Radius-matched timber cradle
  • Panels loaded in installation sequence
  • Edge protection and foam on the concave face
  • Cradle labelled with chord, height and radius
  • Loading photos before sealing

Approvals

What standards is it tested to?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

CE — EN 12150 China CCC ISO 9001:2015

Questions

What buyers ask first

How do I specify a curved panel?
Send the chord length, the height and the radius, or better, the shop drawing. If you only have a template, send the template dimensions and we will confirm the radius before cutting the mould.
Is there a mould charge?
Yes, for a new radius. The mould is a one-off cost and is kept for repeat orders, so the second and third batch of the same radius does not carry it again.
Why does curved tempered glass show slight distortion?
Bending a sheet and then quenching it puts different stress patterns through the thickness, which is visible as anisotropy under polarised light and as slight roller distortion in reflection. It is unavoidable and is accepted in the relevant standards. If the appearance is critical, we can supply heat-strengthened curved glass with lower distortion risk.
Can curved glass be insulating?
Yes, but sealing a curved spacer is slower and the maximum size drops. Curved IGUs are usually made with a curved outer pane and a curved inner pane, both from the same mould, so plan for a longer lead time.

Send the drawing,
we will send a price.

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

Curved glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Arc length, radius, thickness and the mould are costed separately, so we quote the curve on your drawing.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

How is curved glass shipped to the Philippines?

Curved tempered glass is supplied to Philippine projects from our own plant in Qinzhou, China. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7-15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Manila and Cebu have their own pages.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.