What is heat soak testing (HST) and when is it required for tempered glass?
Heat soak testing re-heats tempered glass to about 290 °C for two hours so that any pane containing nickel sulphide inclusions breaks in the oven instead of on the building. It is required where spontaneous breakage would be dangerous or expensive to replace.
Nickel sulphide (NiS) inclusions are a fraction of a millimetre in size and come from the raw glass. After tempering they are trapped in a metastable state and can expand years later, cracking the pane with no impact. Raising the glass to 290 °C ± 10 °C accelerates that transformation, so roughly 95 % of panes that would have failed on site fail in the test chamber instead.
The test is defined by EN 14179-1 (and GB 15763.4 in China), requires a certified furnace with a recorded temperature profile, and adds roughly 2–3 days to the lead time and 3–8 % to the price of the panel.
Which figures decide whether you need a heat soak test?
| Holding temperature | 290 °C ± 10 °C |
|---|---|
| Holding time | 2 hours minimum |
| Standard | EN 14179-1 / GB 15763.4 |
| Failure rate detected | about 95 % of NiS-critical panes |
| Added lead time | 2–3 days |
What should you check on the HST report and the order?
- Required by most facade specifications for heat-strengthened and tempered glass above 4 m, for balustrades, and for any overhead glazing.
- Heat-soaked glass must be re-marked after the test; a batch that was not re-marked cannot be traced and should be rejected on site.
- HST does not remove the risk completely. It reduces it by roughly two orders of magnitude, and it cannot fix bad edge work, which is the other common cause of spontaneous breakage.
Send the glass schedule, thickness build-up and destination port to info@cnglassworks.com or on WhatsApp (reply within 1 hour) / phone +86 138 3303 3053. A specification review and reference price come back within one working day.
Figures verified by the factory on 2026-11-02. Sizes are manufacturing limits, not project guarantees.
Price from USD ___ per sqm FOB Qinzhou, depending on thickness, coating and quantity.
Last updated: 2026-11-22