What are the limits of curved tempered glass for a facade?
Typical Chinese curved tempering lines handle an arc up to 3,300 mm, a height up to 9,000 mm and a radius down to about 1,000 mm; below that radius the glass must be heat-bent in a mould and the cost rises sharply.
Curved glass is defined by three numbers: chord (the straight distance across the arc), height (the other dimension), and radius. The furnace limit is normally on chord and height; the radius limit is set by the bending mould, not the furnace.
Two constraints decide feasibility more often than the furnace. First, coatings: off-line Low-E on a curved pane shows slight colour shift across the bend, so a spandrel and a vision panel bent on the same mould may not match. Second, lamination: a curved laminated unit needs matching curvature on both plies, and any mismatch shows as optical distortion at grazing angles.
What are the real limits of a curved tempering line?
| Maximum arc (chord) | 3,300 mm |
|---|---|
| Maximum height | 9,000 mm |
| Minimum radius | about 1,000 mm |
| Thickness range | 6–19 mm |
| Tolerance on radius | ± 0.5 % of the specified radius |
Which curved-glass details raise cost or risk?
- Cylindrical bending is standard; spherical (double-curved) glass is a different process and only a few plants in China can do it at architectural size.
- Curved insulated units are possible but the spacer must follow the curve, which limits cavity width to about 12 mm.
- Order curved glass with the mould cost quoted separately and the mould kept for repeat orders — a second run on a new mould will not match the first.
Send the glass schedule, thickness build-up and destination port to info@cnglassworks.com or on WhatsApp (reply within 1 hour) / phone +86 138 3303 3053. A specification review and reference price come back within one working day.
Figures verified by the factory on 2026-11-02. Sizes are manufacturing limits, not project guarantees.
Price from USD ___ per sqm FOB Qinzhou, depending on thickness, coating and quantity.
Last updated: 2026-11-22