Shower Glass for Philippine Homes and Condominiums

China Glass Factory is a glass factory in Qinzhou, China, supplying tempered shower glass to Philippine homeowners, condo developers and fit-out contractors. We cut, drill and polish panels from 6 mm to 10 mm to your measured sizes, with 7-15 day production and export packing built for the Manila run.

Fastest way to get a price: Viber Messenger Email
Send thickness, measured sizes and destination port — we reply within 24 hours.

Shower glass supplier Philippines: we are the factory, not a trading house — every panel is cut, drilled and tempered in our own plant in Qinzhou, China, then shipped direct to your site or your fabricator in Manila, Cebu or Davao.

What thickness do you need?

Shower glass in the Philippines is almost always tempered, because a bathroom panel is safety glass by definition — if it breaks it has to break into small blunt pieces, not shards.

BuildThickness (mm)Thickness (inch)Typical use
Framed fixed panel6 mm1/4 inchLight duty, budget fit-out, small openings
Fixed panel + swing door (most common)8 mm5/16 inchStandard condominium and house bathroom
Frameless, large panel10 mm3/8 inchHigh-end, no frame, stiffest feel
Walk-in screen, minimal support12 mm1/2 inchOn request — wide spans with no frame at all

Rule of thumb used on Philippine fit-outs: 8 mm is the default for a swing door. Go to 10 mm when the panel is frameless and wider than 900 mm, because a thin panel that wide flexes and the door drops out of alignment within a year.

Shower glass price Philippines: from USD ___ per sqm FOB Qinzhou. The final figure depends on thickness, edge profile, hole count and quantity — every panel is quoted per project, not off a stock price list.

What happens to the glass before it ships?

StepWhy it matters
Cut to your measured sizeEvery panel is made to order — we do not sell stock sizes for shower work
Drill hinge, handle and bracket holesMust be done before tempering — tempered glass cannot be drilled afterwards
Notch for hinges and strike platesSame reason: the notch is cut while the glass is still annealed
Flat polish or bevelled edgeA polished edge resists chipping in a wet room; a raw edge will craze
Optional: easy-clean coatingWater beads and limescale wipes off — useful where tap water is hard
Optional: frosted or screen-printed bandPrivacy at eye level without losing light through the panel
Temper to EN 12150 / ASTM C1048Shower glass must be safety glass — this is not optional in any code

How do I measure a shower panel without getting it wrong?

Three measurements decide whether a panel fits, and all three are usually wrong on the first try:

MeasurementHow to take itCommon error
WidthMeasure at top, middle and bottom — use the smallestWalls are rarely square; using the largest number gives a panel that will not go in
HeightMeasure at both sides of the openingFloor slope changes the height by 10-20 mm across a bathroom
Door swingCheck the door arc against vanity, towel rail and door framePanel made correctly but the door cannot open past 80 degrees

Send a sketch with these three numbers plus a photo of the opening. We return a cutting list for your written confirmation before production. A tempered panel cannot be trimmed on site — if the measurement is wrong, the panel is scrap. That is why the cutting list is confirmed first, in writing.

How long is delivery to Manila, Cebu and Davao?

PortCoverageProductionSea freight (approx.)Packing
ManilaMetro Manila, Cavite, Laguna, Batangas, Central Luzon7–15 days7–12 daysEnd-cap protectors, cork pads, individual foam wrap, fumigated crate
CebuVisayas — Cebu, Iloilo, Bacolod, Dumaguete7–15 days10–15 daysAs above, plus moisture barrier film for transhipment
DavaoMindanao — Davao, Cagayan de Oro, General Santos7–15 days14–20 daysAs above, reinforced crate and extra corner protection

Loading is from Qinzhou or Beihai. We photograph every container at loading, and prepare FORM E under the ASEAN–China FTA so the shipment can claim the agreement rate on arrival. Small orders are fine: one 20GP, or shower panels consolidated with other glass in a mixed 40HQ.

What we also call it

Shower glass, shower screen glass, shower enclosure glass, shower door glass, bathroom glass panel, tempered shower panel, frameless shower glass, walk-in shower screen — all refer to the same product. Tell us the application and the opening size and we will confirm the right thickness, edge and hole layout rather than guess from the name.

Get a shower glass quotation

ChannelResponseDetail
ViberWithin 2 hours in working hoursPENDING — Viber number to be supplied
MessengerWithin 2 hours in working hoursPENDING — page link to be supplied
EmailWithin 24 hoursinfo@cnglassworks.com

Send four things for a firm price: thickness, measured sizes and piece count, edge and hole details, destination port.

Questions Philippine buyers ask first

Can I drill the holes myself after delivery?

No. Once tempered, the glass shatters if you drill it. All holes, notches and cut-outs must be on the drawing before tempering, which is why we confirm a cutting list with you in writing before production.

Is 8 mm strong enough for a frameless door?

For a door up to about 900 mm wide, yes. Above that — or where the panel is a fixed side screen wider than 1,200 mm with no frame — go to 10 mm. The extra stiffness stops the door from dropping over time.

Can you match the frosted band height to my existing bathroom?

Yes. Tell us the height from the floor where the frosted band starts and finishes. We screen-print or acid-etch that band before tempering, so it cannot peel or be scratched off later.

What is the minimum order?

There is no fixed minimum. One 20GP is fine, and shower panels are often shipped together with other glass in a mixed 40HQ.

Related glass

Request a shower glass quotation — send thickness, measured sizes and destination port.