Philippines PS licence for glass: from April 2026 you cannot import without one — and only 14 had been issued
Short answer: since 3 April 2026, flat glass, heat-strengthened and fully tempered flat glass, laminated safety glass, laminated glass and bent glass sit on the Philippines' mandatory certification list. A Philippine importer now needs a manufacturer holding a valid PS licence, plus an ICC for every shipment. DTI reported that only 14 PS licences had been issued to glass manufacturers worldwide. Full market enforcement starts April 2027. If your supplier cannot produce a licence number, the container is a liability, not stock.
What changed, and when does the PS licence rule apply?
| Date | What happens |
|---|---|
| 2 January 2026 | MC 25-19:2025 takes effect — supplementary procedures for flat glass under DAO 19-05:2019 |
| 2 Jan – 2 Apr 2026 | Transition window to file the PS application |
| 3 April 2026 | PS licence becomes mandatory. Covered glass without a valid licence may not be imported, sold or distributed |
| 2 Jan – 2 Jul 2026 | Window to file a Certificate of Exemption for stock produced or imported before 2 January 2026 |
| April 2027 | Full DTI market surveillance and enforcement begins |
Sources: DTI-BPS Memorandum Circular No. 26-01, s. 2026; DAO 19-05:2019; MC 25-19:2025; DTI statements reported by Inquirer, Manila Standard and PNA in 2026.
Which five product categories now need a PS licence?
| Product | Philippine National Standard | What it means for a curtain wall package |
|---|---|---|
| Flat glass | PNS 193 | Base float and coated stock |
| Heat-strengthened and fully tempered flat glass | PNS ASTM C1048 | Vision glass, spandrel, doors, balustrades |
| Laminated safety glass | PNS 12543-2 | Overhead glazing, typhoon zones, balustrades |
| Laminated glass | PNS 12543-3 | Acoustic and security builds |
| Bent glass | PNS ASTM C1464 | Curved facades, canopies, corner units |
In practice that list covers almost everything in an architectural glass package. A supplier who can quote tempered and laminated glass but cannot show a licence number is quoting a product that will be stopped at the port from April 2027 at the latest.
Why do only 14 PS licences matter to an importer?
DTI's own figure was 14 PS licences issued to local and foreign glass manufacturers. Set that against the number of Chinese, Malaysian, Vietnamese and Indonesian suppliers actively quoting into Philippine projects and the arithmetic is obvious: most quotes you receive today are from companies that do not hold one.
Two things follow from this, and they cut in opposite directions for a buyer:
- A licensed supplier becomes scarce, so their price holds. Expect less discount pressure than you are used to.
- An unlicensed supplier is cheap for a reason, and the risk lands on the importer, not the exporter. The glass is seized or refused; the invoice is already paid.
If you are a contractor signing a supply contract now for delivery in 2027, the licence status of your source is a contract risk item, not a paperwork detail.
Which six questions should you send a Chinese glass supplier?
- Your PS licence number, and the product categories it covers. A licence is issued per product category. Tempered does not automatically cover laminated.
- The expiry date. PS licences run three years with an annual surveillance audit. A 2024 licence may already be in its renewal cycle.
- Whether the licence predates or postdates April 2026. An older BPS registration is not automatically the new PS licence under the 2026 circular — ask which framework it was issued under.
- Who your Philippine importer of record is, and whether they are registered in PCIMS. Applications must be filed by a Philippine entity; a Chinese factory cannot self-register.
- Whether you will issue the Statement of Confirmation for each shipment. Every batch needs one, not just the first.
- How the PS mark, licence number, country of origin and manufacturer name are printed on the sheet — and whether the marking survives cutting down. This is a specific requirement and a common failure point.
What did the 2026 revision make easier?
It is not all tightening. Three requirements were dropped, which shortens the path for a serious factory:
| Requirement | Status after the 2026 revision |
|---|---|
| Loading port inspection report (LPSR) | No longer mandatory |
| Production records submission | No longer mandatory |
| Latest audited financial statements | No longer mandatory |
| Importer minimum capital of PHP 20 million | Abolished. Any registered importer may now import covered glass |
The capital requirement being dropped matters more than it looks. It means small and mid-sized Philippine fabricators and contractors — not just the large trading houses — can now import directly, provided their source holds a licence. That widens the buyer pool considerably.
What does a PS licence cost, and how long does it take?
| Item | Typical figure |
|---|---|
| Product testing at a BPS-recognised laboratory | USD 500 – 2,000 per product family |
| Application fee | About USD 100 |
| Factory audit (including auditor travel) | About USD 1,500 |
| Annual certificate fee | About USD 200 |
| Total timeline, clean case | 8 – 12 weeks |
| Total timeline, with factory corrective action | 3 – 5 months |
Figures are market ranges for the certification process, not an official BPS fee schedule. Budget the factory audit as the schedule risk, not the lab test.
How does this change a 2027 tender?
Three practical consequences for anyone specifying or buying glass for a Philippine project with delivery after April 2027:
- Write the licence into the specification. "Supplier must hold a valid PS licence covering [tempered / laminated / bent] glass and provide the number with the bid." It costs nothing to add and eliminates most of the field.
- Ask for the ICC history, not just the licence. A supplier who has actually shipped under ICC has done this before. One who has a licence but has never filed an ICC will discover the process on your first container.
- Do not let the low bid set your compliance standard. The price gap between a licensed and an unlicensed source is roughly the cost of the certification plus the risk premium the licensed supplier carries. It is not a bargain.
Where does China Glass Factory stand on PS licensing?
We supply the test reports for heat-strengthened and fully tempered flat glass required for Philippine ICC clearance, alongside Malaysia SIRIM, EU CE and Kuraray SentryGlas® Plus (SGP) processor approval. Because BPS renews periodically and the 2026 circular changed the framework, we send the current certificate copy and its scope with every quotation rather than asking you to take a number on a website on trust. If you are preparing a tender, ask for the scan and check the validity dates yourself — that is the document a consultant will accept, not a line on a page.
Preparing a Philippine tender for 2027 delivery?
Send the glass schedule and we will come back with the specification, the licence documentation set and a formal quotation — FOB Qinzhou or CIF Manila, Cebu, Subic or Davao. Write to info@cnglassworks.com. Full market details are on the Philippines page; the certificate list is on the certificates page.